Filter
Top Products
Call forwarding allows you to forward incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
To activate call forwarding, select Activate. To check
whether the option is active, select Check status.
Several forwarding options can be active at the same
time. When all calls are forwarded,
is shown in
the standby mode.
Call restriction and call forwarding cannot be active at
the same time.
Call restrictions
Press , and select Tools > Settings > Phone >
Call restriction.
Call restrictions (network service) allow you to restrict
the calls that you make or receive with the device. For
example, you can restrict all outgoing international
calls or incoming calls when you are abroad. To change
the settings, you need the restricting password from
your service provider.
Call restriction and call forwarding cannot be active at
the same time.
When calls are restricted, calls may be possible to
certain official emergency numbers.
Voice call restrictions
Select the desired restricting option, and set it on
(Activate) or off (Deactivate), or check whether the
option is active (Check status). Call restricting affects
all calls, including data calls.
Internet call restrictions
To select whether anonymous calls are allowed from
the internet, set Anonymous call restriction on or off.
Network settings
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with
.
Press
, and select Tools > Settings > Phone >
Network and from the following:
● Network mode — Select which network to use. If
you select Dual mode, the device uses the GSM or
UMTS network automatically, according to the
network parameters and the roaming agreements
between the wireless service providers. For details
and roaming costs, contact your network service
provider. This option is shown only if supported by
the wireless service provider.
A roaming agreement is an agreement between two
or more service providers to enable the users of one
service provider to use the services of other service
providers.
● Operator selection — Select Automatic to set the
device to search for and select one of the available
networks, or Manual to manually select the
160
Settings