Filter
Top Products
Incompatible cards may damage the card and the
device and corrupt data stored on the card.
Insert the memory card
A memory card may be already inserted in the
device. If not, do the following:
1. With the back of the device facing you, lift up the
cover.
2. Insert a compatible memory card in the slot.
Ensure that the contact area on the card is facing
down and towards the slot.
3. Push the card in.
You can hear a
click when the
card locks into
place.
4. Close the back
cover. Ensure that
the cover is
properly closed.
Remove the memory card
Important: Do not remove the memory card
during an operation when the card is being
accessed. Doing so may damage the memory card
and the device, and corrupt data stored on the card.
1. Before you remove the card, press the power
key, and select Remove memory card. All
applications are closed.
2. When Removing memory card will close all
open applications. Remove anyway? is
displayed, select Yes.
3. When Remove memory card and press 'OK' is
displayed, remove the back cover of the device.
4. Press the memory card to release it from the slot.
5. Pull out the memory card. If the device is
switched on, select OK.
6. Replace the back cover. Ensure that the cover is
properly closed.
Switch the device on and off
To switch on the device:
1. Press and hold the power key.
2. If the device asks for a PIN code
or lock code, enter it, and
select OK. The preset lock code
is 12345. If you forget the
code and your device is locked,
your device will require
service and additional charges
may apply. For more
information, contact a Nokia
Care point or your device dealer.
17
Get started