Filter
Top Products
Changing Your Settings 146
Calibration
The Calibration feature allows you to re-align the screen’s touch accuracy. Use this feature only when the device
does not respond properly when you touch the screen.
1. From Idle mode, touch
Menu
➔
Settings
➔
Phone settings
.
2. Touch
Calibration
.
3. Touch the center of the target and repeat this step for each target that displays.
4. Touch
OK
when the
New settings saved...
message displays.
5. Touch the
END
key to return to Idle mode.
Auto keypad lock
1. From Idle mode, touch
Menu
➔
Settings
➔
Phone settings
.
2. Touch
On
or
Off
from the
Auto keypad lock
field.
Security
The Security feature enables you to restrict the use of your phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1. From Idle mode, touch
Menu
➔
Settings
➔
Phone settings
.
2. Touch
Security
.
Lock Phone
When the Lock Phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password
each time the phone is switched on.
To change the phone password, refer to the next section.
Once you enter the correct password, you can use the phone until you switch it off.
1. Touch
On
or
Off
from the
Lock phone
field.
T919 Roxy.book Page 146 Thursday, September 25, 2008 5:01 PM