Filter
Top Products
Camera-Camcorder 128
6.
To save the picture(s) to memory, touch the
Save
button.
To discard the pictures, touch the
Erase
button. You are
prompted to confirm the erasure.
Taking Videos
To take a video using the current camcorder settings, do the
following:
1. In Camera mode, touch the
Mode
button ( ). The
camcorder view finder screen appears in the display. (For
more information, refer to “Camcorder Screen” on
page 130)
Note:
You can also activate the camcorder from standby mode by touching
the
Menu
soft key, then selecting
Multimedia
➔
Camcorder
.
2. Using the display as a viewfinder, point the camera lens at
your subject.
3. Press the
Camera
key when the image that you wish to
capture appears in the display. Recording continues until
one of the following occurs:
•
You touch
Stop
().
•
Available memory is used up (
Normal
setting).
•
15 seconds of video have been recorded (
Video Msg
setting).
4. Touch one of the following buttons:
•Save
— to save the video to memory.
•Send
— to send the video in a message.
•Erase
—to erase the video.
Screen Layouts
Camera Screen
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
Camera Screen Buttons
Changes the Camera-Camcorder mode to Camcorder.