Filter
Top Products
110
If the phone does not recognize your command the Command not
recognized screen displays with two options:
•
Tutorial
: provides instructions on how to use voice commands.
•
Restart
: press and try the command options again.
Speak clearly when giving your command. There is no need for
you to speak slowly or with added emphasis. The voice
recognition software has been optimized to understand your
speech in its natural form. If it does not recognize your command
after a few seconds, a voice prompt asks you to repeat the
command. If it does not recognize your command again, the
following message displays “Sorry, no match found,” and voice
recognition turns off.
You must end your current Voice Commands call before you can
make another call using Voice Commands. You can only originate
the first call in a 3-way call using Voice Commands.
Voice Recognition Tips
•
Wait for the tone before you speak.
•
Speak clearly and at a normal volume.
•
There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech, and performs best when
you speak naturally.
•
In very noise environments, it may be helpful to use a headset or a
Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
When you add or change contacts, the software automatically
reloads and voice-activates the list when you add or modify a
contact.
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time will vary based on the
available memory within the phone.
1. Press
Menu
➔
My Stuff
➔
Tools
➔ Record Audio. For
more information, refer to “Record Audio Settings” on
page 49.
2. To start recording, press . Record a memo by speaking
into the microphone.
3. During the recording process you can either press
Stop
to
stop the recording or
Pause
to temporarily halt the
recording. Once the audio recording has stopped, the
message is automatically saved.
4. Once stopped, choose from one of the following options:
a687 Crunch.book Page 110 Tuesday, February 23, 2010 6:20 PM