Filter
Top Products
28
•Total Sent Data
: shows the size of the total data packet (measured
in KB - kilobytes) which were sent by the phone since the last time
this counter was reset.
• Total Received Data
: shows the size of the total data packet
(measured in KB - kilobytes) which were received by the phone
since the last time this counter was reset.
2. Press
Reset
to set the counters to zero.
3. Enter the password and press Confirm to reset all
counters. For more information, refer to “Change Phone
Password” on page 41.
Call Waiting
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the Settings ➔ Call
s
➔
Voice Call
➔
Call Waiting
Menu to Activated. You are notified of an
incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press to answer the next incoming call. The first call
is automatically placed on hold.
2. To switch between the two calls, press
Options
➔ Swap.
•Swap
: Places the current call on hold and then activates the
previous call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
supported by the network, you can join all the calls together. A
call waiting tone notifies you of an incoming call.
Note:
The Join option combines all of the calls you have established with
your phone (both active and on hold).
Swap places the current call on hold and then activates the previous
call.
This feature joins all of the calls you have established with your
phone (both active and on hold) into a multi-party call.
1. Press to answer the first incoming call.
2. Press or
Accept
to answer the next incoming call. The
first call is automatically put on hold.
3. Press
Options
➔
Join
to join the two callers and create a
multi-party call.
4. Press to end the call.
a687 Crunch.book Page 28 Tuesday, February 23, 2010 6:20 PM