Filter
Top Products
Changing Your Settings 47
Network Profile Configuration
Configuring your Network Profiles
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection is made via one of the available WAP
browsers: MEdia Net and AT&T MMS (MultiMedia Server). You
need these settings to use the web browser or send MMS
messages or e-mails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although you
can change the active connection, please ask your local retailer
or customer service representative to assist.
1. In Idle mode, press
Menu
➔
Settings
➔ Connectivity
➔ Network Profiles.
2. Highlight one of the following options and press the
View
soft key.
• MEdia Net
• AT&T MMS
• AT&T IMS
Note:
MEdia Net, AT&T MMS, and AT&T IMS are pre-configured and cannot
be altered on this screen. Your phone is set up by default for
connecting to the network.
– or –
Press Options ➔ New, and press the Select soft key or
the key to create a new connection.
3. Select one of the following parameters to edit. They may or
may not appear depending on the Network Profile that was
selected:
•
Set Name
: enter a profile name.
•
Access Name
: edit the access point name.
•
Auth Type
: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
•
User ID
: enter the User ID required to connect to the network.
•
Password
: enter the user password required to connect to
the network.
•
Protocol
: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
•
Home URL
: enter the URL address of the page to use as
your homepage.
•
Proxy Address
: MEdia Net set as the proxy server address
and port. This option only appears when the Protocol is set to HTTP.
• Gateway Address
: Enter the Gateway Address. This option only
appears when the Protocol is set to WAP.
a687 Crunch.book Page 47 Tuesday, February 23, 2010 6:20 PM