Filter
Top Products
48
• Secure Connection
: Select On or Off depending on whether or not
you have a secure connection. This option only appears when the
Protocol is set to WAP.
•
Linger Time (sec.)
: set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
•
Advanced Settings
: allows you to configure some of the
IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class. Highlight this option and press the Edit soft key to
access the following options:
–
Static IP
: specify if you want to manually enter an IP address. Remove
the check mark if you want the server to automatically assign the IP
address.
–
Local Phone IP
: allows you to configure the local phone IP address.
–
Static DNS
: specify if you want to manually enter the Domain Name
Server (DNS) address. Remove the check mark if you want the server to
automatically assign the address.
–
Server 1/Server 2
: enter the Domain Name Server (DNS) addresses.
–
Traffic Class
: select the traffic class, press the Edit soft key, select a
Traffic Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press the OK soft key.
Note:
The WAP settings varies depending on the service provider.
IMS Settings
IMS is the method used to connect to the server in order set up
the Video Share option.
1. In Idle mode, select
Menu
➔
Settings
➔
Connectivity
➔
IMS Settings
.
2. Select one of the following options:
•Service
allows you to set the IMS service to
On
or
Off
.
Important!:
If you reset the IMS Service to
Off
, you are unable to use the
Video Share Option.
• Profile
allows you to set the server which is providing service.
Select a profile and make your alterations.
Important!:
If you change from the default
AT&T IMS
, Video Sharing may be
unavailable.
Applications Settings
The Applications Settings feature allows you to configure the
functional parameters for most of the onboard applications.
These applications are described in more detail within other
sections of this manual.
1. In Idle mode, select
Menu
➔
Settings
➔ Applications
Settings.
2. Select the type of application which you want to change:
• Messaging Settings
(see page 81)
• Browser Settings
(see page 103)
a687 Crunch.book Page 48 Tuesday, February 23, 2010 6:20 PM