Filter
Top Products
SpectraLink Corporation Setup and Administration–NetLink e340 & i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-E.doc Page 23
4. License Management
The NetLink Wireless Telephone system supports a number of different IP protocol
integrations. All NetLink e340 and i640 Wireless Telephones are shipped from
SpectraLink with a generic software load that allows them to associate to a wireless LAN
and download their functional software from a TFTP server. The Wireless Telephones
will not function properly without downloading appropriate software.
The following details the process to properly configure NetLink Wireless Telephones and
download software via over-the-air file transfer.
4.1 Requirements
• A wireless LAN must be properly configured and operational through the use of
802.11b wireless access points.
• NetLink Telephony Gateway must also be connected to your network and
completely operational, and the handset must be registered to it.
• The NetLink Telephony Gateways have a TFTP Server and must be available on
the network in order to load the appropriate software into the Wireless
Telephones. Most installations choose to take advantage of the TFTP Server that
accompanies the NetLink Telephony Gateway, making a separate TFTP Server
unnecessary.
• Finally, ensure that the Battery Pack on the Wireless Telephone is fully charged.