Filter
Top Products
SpectraLink Corporation Setup and Administration–NetLink e340 & i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-E.doc Page 9
2.1 Quick Start Guide
1. A wireless LAN must be properly configured and operational through the use of
802.11b wireless access points (APs).
2. A NetLink Telephony Gateway must be available on the network and the handset
must be registered to it in order to load the appropriate software into the Wireless
Telephones. Most installations choose to take advantage of the TFTP Server that
accompanies the NetLink Telephony Gateway, making a separate TFTP Server
unnecessary.
3. The NetLink Telephony Gateway or NetLink SVP Server, which controls the QoS
on the wireless LAN for the Wireless Telephones, must be on the same subnet as
the Wireless Telephones and have the proper versions of software.
4. Download software: Download the correct NetLink Wireless Telephone software
per Section 4.2 Configuration Process. Ensure the software is properly loaded on
the NetLink Telephony Gateway, or a separate TFTP server. Download updates to
the NetLink SVP Server software (if the NetLink SVP Server is installed) per
NetLink SVP Server Installation, Setup and Maintenance Section 6.1 Software
Updates (72-0178-00). Download updates to the NetLink Telephony Gateway
software per NetLink Telephony Gateway Setup and Administration document,
Section 14 Software Maintenance Section 14.
5. Configure your Wireless Telephone to ensure that it associates with the wireless
LAN, has the appropriate software and is registered to the appropriate NetLink
Telephony Gateway.