Filter
Top Products
131
Adding New Events
6
The default date assigned to an event is the day that was highlighted
when you accessed the Event Form screen to add the event. To assign a
different date:
With the StartDate field highlighted, press C under CHANGE.
From the StartDate screen, enter the date of the event:
Type in the date, or press S to scroll through the months, days, and
years. Press T or press C under G to move through the fields.
Press C under DONE.
The Event Form screen returns with the Repeat field highlighted.
7
If you want the event to recur in your Datebook, assign a repeat cycle to
it:
With the Repeat field highlighted, press C under CHANGE.
From the Repeat screen, press S to scroll to the desired repeat cycle.
Press C under SELECT.
The Event Form screen returns with the RepeatEnd field highlighted.
NOTE:When Repeat is set to none or yearly, it will not be possible
to access the RepeatEnd field.
Press C under CHANGE and enter the date on which you want the
event to stop repeating. When you have finished, press C under
DONE.
The Event Form screen returns with the Alarm field highlighted.