Filter
Top Products
159
Settings
To set a notification type:
Phone Setup
Phone Setup sets some basic phone features. Access Phone Setup to set the
following options:
• Line — enables you to choose Line 1 or Line 2 as the active line for
outgoing calls.
• AutoAns — sets your phone to automatically answer an incoming call
after a specified number of rings. When this feature is turned on, the phone
answers by connecting you to the caller; it does not send the call to Voice
Mail, unless you are out of coverage or on another call.
• Any Key — when turned on, enables you to answer calls by pressing any
key on the alphanumeric keypad.
• Network ID — enables you to set the phone’s network IDs under the
direction of a Nextel Customer Care Representative.
In Call Setup
In Call Setup sets the in-call timer, message notification, and call waiting
features.
•The In Call Timer option turns the following features on and off:
• Display — the duration of each call displays on the phone’s screen
when the call ends.
• Minute Beep — an audible beep occurs every minute of an active call
at the 50 second mark.
1
From the Ring/Vibrate screen, ensure that VibeAll is set to Off. Then
press S to scroll to any of the features on the Ring/Vibrate screen
after VibeAll.
2
Press C under SELECT.
3
With the Type field highlighted, press C under CHANGE.
4
Press R to scroll to the notification type you want to assign to the
feature.
5
To assign the notification type, press C under SELECT.