Telos NX12 Cell Phone User Manual


 
118 | Appendix 3
ISDN BRI LINE ORDER
USA & Canada
Telos Nx12
To: Telephone Company
Attention: ________________________________
From
Company: _______________________________________
Address: ________________________________________________
City/State/ZIP: __________________________________
Phone: ________________________
Contact:______________________________
Location for line
Company: _______________________________________
Address: ________________________________________________
City/State/ZIP: __________________________________
Phone: ________________________
Contact:______________________________
Date needed: _____________________ Termination date: _____________________
Long distance carrier: ___________________________
Number of BRI circuits required: _______
We request ISDN BRI circuits for use with the Telos Nx12 digital telephone system. is device
interfaces studio audio equipment to ISDN. It requires Circuit Switched Voice (CSV). We may also
use this line for other equipment that makes calls using Circuit Switched Data (CSD) service. Please
advise us if there is a cost penalty for having both CSD and CSV.
If you use IOC (ISDN Order Code Capability) packages, please use Capability Package ‘S’ . If you do
not use IOCs, use the information on the pages that follow.
e Nx12 has an integral BRI terminal adapter which supports these protocols:
AT&T 5ESS: Custom Point-to-Point (5E4.2 or later), National ISDN-1 or 2
Northern Telecom DMS-100: Functional (PVC1), National ISDN-1 or 2 (PVC2)
Siemens EWSD: National ISDN-1 or 2
(AT&T Point-to-Multipoint (Custom) is not supported by the Telos Nx12)
Please let us know which protocol you will provide and the switch. We will provide the NT1 and need
a U interface with 2B1Q line coding on a standard, six-pin/4-conductor RJ11-style modular jack
(USOC SJA48), of which only the center two conductors will be used.
Hunt Groups (please give us the option specified below):
Please put all Directory Numbers for all BRI’s in a single hunt group
Please create a hunt group with all Directory Numbers except (Specify) ________________