Filter
Top Products
60 | Section 5
to get this from your network administrator or Internet service provider.
To enter IP addresses using the LCD/button interface:
Select the TCP/IP Settings… sub-menu.
To enter an IP address, use the following procedure:
Highlight the IP address1.
Press OK2.
Press 3. ∇ repeatedly to delete existing IP address
Press 4. ∆ until the desired digit is displayed
Press OK to accept that digit. To delete a incorrect digit press 5. ∇
Press 6. ∆ until the desired digit is displayed
Once all characters are entered, press OK twice to save your entry7.
Return takes you back to the System menu.
Syslog Server & Syslog Filter (Web only)
Permit logging to external computers running Linux standard Syslog for troubleshooting
purposes.
Contrast (LCD Only)
Adjusts the contrast of the LCD. Values range from 0 to 10. e usual setting is 5.
Show Mode (LCD Only)
e Web Setup Wizard is another way to select show mode.
e term “Show” comes from our Series 2101 system, which supports up to 120 lines and more
than 64 hybrids in multiple studios. Each Show selects a group of Telco lines and an audio I/O.
Next queues and other functions are distinct for each show.
e Nx12 has only 12 lines and 4 hybrids, so it’s considerably simpler. Single studio modes have
only Show 1. However, the Nx12 also supports two-studio modes, in which case there will be
Show 1 and Show 2. Desktop Directors and call screening applications connect to the appropri-
ate show, and each show has associated audio inputs and outputs.
See Section 5.7 for details on the various show modes. Choices are:
One Show (default)
♦
2 Show Custom ♦
2 Show Split ♦
2 Show Shared ♦
4 Column ♦
Note: You must reboot the system after changing this setting.