Filter
Top Products
DETAILED CONFIGURATION & REFERENCE | 61
Hold on Select
e Direct Hold feature allows the operator to seize the next call which has been ringing for the
longest time and put the caller he was talking with back on hold in one simple step, by pressing
the Next key.
If no call is ringing, the process remains the same with callers on hold. Pressing the Next key
seizes the call, which was on hold for the longest time, and puts the previous caller on hold.
is feature also works when manually selecting a new line in a column. If existing unlocked
calls are present, the lines will be placed on hold.
e choices are:
None
♦ – feature disabled
Talent
♦ – enabled only for Desktop Directors in Talent mode.
Producer
♦ – enabled only for Desktop Directors in Producer mode.
Both
♦ – enabled for both Producer and Talent modes.
Audio Loop (LCD Only)
is is for testing purposes. Choices are:
Off
♦ – is is the normal operating mode. No loopback path is turned on. Studio Input is
sent as send audio, and caller audio is presented at Studio Out.
Studio
♦ – is loops the AES/EBU input (and analog signal after Analog-to-Digital
conversion) back to the AES/EBU output (and analog output via the Digital-to-Analog
converter). is can be used to proof the audio input and output sections
No EC ♦ – is is not a loop mode, but a test mode. It disables the echo canceller on the
phone line, so that measurements such as SNR and THD can be made from the Telco
line to the output.
Factory Defaults (LCD Only)
Selecting this option displays the Restore Defaults sub-menu with the following options.
Return
is takes you back to the System menu.
Restore Defaults?
is menu has two options:
No ♦ – Goes back to the Restore Defaults sub-menu.
Yes
♦ – Erases all user configuration and sets all to the original factory defaults.
Reboot (LCD Only)
Selecting this item displays the Restore Defaults sub-menu with the following options.
Return
is takes you back to the System menu.