Filter
Top Products
120 | Appendix 3
Give us:
Two SPID numbers, depending upon number of active B channels
♦
Two Directory Numbers ♦
PROTOCOL: AT&T Point-to-Point (Custom)
Software version 5E4.2 and above.
CO Values
Line Type (DSL class): Custom Point-to-Point (PTP)
♦
B1 Service: On Demand (DMD) ♦
B2 Service: On Demand (DMD) ♦
Maximum B Channels (MaxChan): 2 ♦
CSV Channels: Any ♦
Number of CSV calls: 2 ♦
CSD Channels: Any (CSV is required; CSD may be omitted if requested by user) ♦
Number of CSD calls: 2 ♦
Terminal Type: A ♦
Number Display: No ♦
Call Appearance Pref:Idle ♦
10XXXXX Long Distance Prefix: Yes ♦
Turn off features such as; packet mode data, multiple call appearances, Electronic Key Tele-
phone Sets (EKTS), shared directory numbers, accept special type of number, intercom groups,
network resource selector (modem pools), message waiting, hunting, interLata competition, etc.
Note for AT&T/Lucent 5ESS on loop extended lines: REX test must be disabled for this line
using one of the following: ASDFI266 (Prohibit REX on BRI lines per office) or ASDFI267
(Prohibit REX on BRI lines per line)
Give us:
One Directory Number
♦