Toshiba AT7-C Cell Phone Accessories User Manual


 
Always place your tablet or AC adaptor on a flat and hard surface that
is resistant to heat damage.
1. Plug the USB connector of the Micro-USB cable into the AC adaptor.
Figure 3-3 Connecting the AC adaptor 1
2-pin
3-pin
2. Plug the other smaller connector of the Micro-USB cable into the
Micro-USB port on your tablet.
The Micro-USB connector of the Micro-USB cable must be correctly
plugged into the Micro-USB port on the tablet. Failure to do so correctly
may result in possible damage to the Micro-USB port.
Figure 3-4 Connecting the AC adaptor 2
1
2
3. Plug the AC adaptor into a live wall outlet.
Wall outlet
The fastest way to charge your tablet is with the included AC adaptor
plugged into a wall outlet.
USB charge
In “suspend or shutdown mode,” you can also charge your tablet,
although more slowly, by connecting the Micro-USB cable to the USB
port on your PC. Please make sure your PC is turned ON while
charging via USB. If your PC is turned OFF, depending on PC
specifications, the tablet battery may discharge. We recommend that
you do not use your tablet while charging via USB as auto shutdown
may occur if the battery charge is too low.
Turning on the power
This section describes how to power up your tablet.
User's Manual
3-7