xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
108
DGS-3627:admin# debug bgp show redist_list
Command: debug bgp show redist_list
Last redistribution count summary:
Type Route_count_rib total_count Time(msec)
------ ---------------- --------------- ---------
OSPF 0 0 0
RIP 0 0 0
STATIC 0 0 0
LOCAL 0 0 0
Redistributed routes summary:
Network Type Route_map Metric Next_hop
------- ---- --------- ------ -------------
Total entry: 0
Redist list information:
No redist list exist!
debug bgp show as_path_access_list
Purpose This command is used to display the current BGP path access list configuration in the BGP
protocol stack.
Syntax
debug bgp show as_path_access_list
Description This command is used to display the current BGP path access list configuration in the BGP
protocol stack.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
Configure BGP to show the current BGP path access list information:
DGS-3627:admin# debug bgp show as_path_access_list
Command: debug bgp show as_path_access_list
BGP AS Path Access List 1
deny (_64[6-9][0-9][0-9]_|_65[0-9][0-9][0-9]_)
permit 33
Total entry: 1
debug bgp show community_list
Purpose This command is used to display the current community list configuration in the BGP protocol
stack.
Syntax
debug bgp show community_list
Description This command is used to display the current community list configuration in the BGP protocol
stack.
