xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
180
DGS-3627:admin# show packet ports 2:7
Command: show packet ports 2:7
Port number : 2:7
Frame Size/Type Frame Counts Frames/sec
--------------- ---------------------- -----------
64 30284 3
65-127 5998 0
128-255 11985 1
256-511 1004 0
512-1023 1363 0
1024-1518 15 0
1519-1522 0 0
1519-2047 0 0
2048-4095 0 0
4096-9216 0 0
Unicast RX 1 0
Multicast RX 0 0
Broadcast RX 5 0
Frame Type Total Total/sec
--------------- ---------------------- -----------
RX Bytes 384 0
RX Frames 6 0
TX Bytes 5619310 340
show error ports
Purpose Use to show error statistics information for a range of ports.
Syntax
show error ports <portlist>
Description The show error ports command shows error statistics for a range of ports.
Parameters
portlist - Specifies a range of ports to be displayed. (Unit ID: port number).
Restrictions None.
Example usage:
To display the errors of the port 3 of unit 1:
DGS-3627:admin# show error ports 1:3
Command: show error ports 1:3
Port number : 1:3
RX Frames TX Frames
------------------------------------------ ---------------------------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
Buffer Full Drop 0
ACL Drop 0
Multicast Drop 0
