xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
57
Example usage:
To configure the user password of the “alpha” account:
DGS-3627:admin# config account alpha
Command: config account alpha
Enter an old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
show account
Purpose This command is used to display the user accounts that have been created on the Switch.
Syntax
show account
Description The show account command displays the user accounts that have been created on the
Switch.
Parameters None
Restrictions Only Administrator level users can issue this command.
Example usage:
To display the user accounts that have been created on the Switch:
DGS-3627:admin# show account
Command: show account
Current Accounts:
Username Access Level
--------------- ------------
System User
dlink Admin
Total Entries : 2
delete account
Purpose This command is used to delete an existing account.
Syntax
delete account <username>
Description The delete account command deletes an existing account.
Parameters
<username> - Specify the name of the user that will be deleted.
Restrictions Only Administrator level users can issue this command.
Example usage:
To delete the user account “System”:
