xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
358
DGS-3627:admin# disable address_binding dhcp_snoop ipv6
Command: disable address_binding dhcp_snoop ipv6
Success.
clear address_binding dhcp_snoop binding_entry
Purpose Used to clear the DHCP snooping entries learned for the specified ports.
Syntax
clear address_binding dhcp_snoop binding_entry ports [ <portlist>|all ] {[ipv6 | all]}
Description To clear the DHCP Snooping entries learned for the specified ports.
Parameters
ports - Specify the list of ports to clear the DHCP snooping learned entries.
ipv6 - Clear IPv6 DHCP snooping learned entries.
all - Clear both IPv4 and IPv6 DHCP snooping learned entries.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To clear DHCP IPv4 snooping entries on ports 1-3:
DGS-3627:admin# clear address_binding dhcp_snoop binding_entry ports 1-3
Command: clear address_binding dhcp_snoop binding_entry ports 1-3
Success.
To clear DHCP IPv6 snooping entries on ports 1-3:
DGS-3627:admin# clear address_binding dhcp_snoop binding_entry ports 1-3 ipv6
Command: clear address_binding dhcp_snoop binding_entry ports 1-3 ipv6
Success.
show address_binding dhcp_snoop
Purpose Used to display the DHCP snooping configuration and learning database.
Syntax
show address_binding dhcp_snoop {[max_entry { ports <portlist>} | binding_entry
{port <port>}]}
Description This command is used to show all DHCP snooping configuration and learning databases.
Parameters
max_entry - To show the maximum number of entries per port.
binding_entry - To show DHCP snooping binding entries on ports. If no ports specified show
all binding entries.
If no parameters are specified, show DHCP snooping displays the enable/disable state.
Restrictions None.
Example usage:
To show the DHCP snooping state:
