xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
464
debug stp show flag
Purpose Used to show the per-port STP debug level.
Syntax
debug stp show flag {ports <portlist>}
Description This command used to display the STP debug level on specified ports.
Parameters
ports <portlist> - Specifies the STP ports to display
If no parameter is specified, all ports on the switch will be displayed.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To display the debug STP levels on all ports:
DGS-3627:admin# debug stp show flag
Command: debug stp show flag
Global State: Enabled
Port Index Event flag BPDU Flag State Machine Flag
---------- ---------- --------- ------------------
1 Detail Brief Disable
2 Detail Brief Disable
3 Detail Brief Disable
4 Detail Brief Disable
5 Detail Brief Disable
6 Detail Brief Disable
7 Detail Brief Disable
8 Detail Brief Disable
9 Detail Brief Disable
10 Detail Brief Disable
11 Detail Brief Disable
12 Detail Brief Disable
Success.
debug stp show counter
Purpose Used to show the STP counters.
Syntax
debug stp show counter { ports [ < portlist > | all ] }
Description This command used to display the STP counters.
Parameters
ports <portlist> - Specifies the STP ports for display..
all - Display all port’s counters
If no parameter is specified, display the global counters.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show the STP counters for port 9:
