xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
33
Each command is listed, in detail, in the following sections.
enable 802.1x
Purpose Used to enable the 802.1X function.
Syntax
enable 802.1x
Description The enable 802.1x command enables 802.1X function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
Used to enable the 802.1X function:
DGS-3627:admin#enable 802.1x
Command: enable 802.1x
Success.
disable 802.1x
Purpose Used to disable the 802.1X function.
Syntax
disable 802.1x
Description The disable 802.1x command disable 802.1X function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the 802.1X function:
DGS-3627:admin# disable 802.1x
Command: disable 802.1x
Success.
create 802.1x user
Purpose Used to create an 802.1X user.
Syntax
create 802.1x user < username 15 >
Description The create 802.1x user command create an 802.1X user.
Parameters
username - Specifies adding user name.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
