xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
494
show ospfv3 lsdb
Restrictions None.
Example usage:
To display OSPFv3 LSDB:
DGS-3627:admin# show ospfv3 lsdb
Command: show ospfv3 lsdb
Router LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# Link
0.0.0.0 2.2.2.2 696 0x80000003 0
Link LSA (Interface System)
Link State ID ADV Router Age Seq# Prefix
0.0.0.1 2.2.2.2 696 0x80000003 1
Intra-Area-Prefix LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# Ref LSA Type
0.0.0.1 2.2.2.2 684 0x80000004 0x2001
Total Entries: 3
DGS-3627:admin# show ospfv3 lsdb type rtrlink
Command: show ospfv3 lsdb type rtrlink
LS Age: 782
LS Type: Router-LSA
Link State ID: 0.0.0.0
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000003
Checksum: 0xED3A
Length: 24
Flags: 0x0: - - - -
Options: 0x13: - R - - E V6
Total Entries: 1
show ospfv3 neighbor
Purpose Used to display OSPFv3 neighbor information.
Syntax
show ospfv3 neighbor {<neighbor_id> ipif <ipif_name 12>}
Description This command is used to display OSPFv3 neighbor information.
Parameters
neighbor_id - Specify the ID of the neighbor. If none of the parameters are set, all neighbors
will be displayed.
ipif - Specify the interface where the neighbor is built. If none of the parameters are set, all
neighbors will be displayed.
Restrictions None.
Example usage:
To display OSPFv3 neighbor:
