xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
225
show dhcpv6_relay
Parameters
ipif_name - The name of the IP interface that will be displayed in the current DHCPv6 relay
configuration.
If no IP interface is specified, all configured DHCPv6 relay interfaces will be displayed.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
This is an example to show the DHCPv6 relay configuration of all interfaces:
DGS-3627:admin# show dhcpv6_relay
Command: show dhcpv6_relay
DHCPv6 Hops Count Limit : 4
DHCPv6 Global State : Disabled
------------------------------------------------------------------
System Interface:
DHCPv6 Relay Status : Disabled
Server Address : 2001:DB8:1234:0:218:FEFF:FEFB:1
Server Address : 3ffe::500
Server Address : 3ffe::600
Server Address : ff05::1:3%Ipif1
Ipif_1 Interface:
DHCPv6 Relay Status : Enabled
Server Address : 2001:DB8:1234:1:218:FEFF:FEFB:2
Ipif_2 Interface:
DHCPv6 Relay Status : Disabled
Total Entries : 3
To show the DHCPv6 relay configuration of the System interface:
DGS-3627:admin# show dhcpv6_relay ipif System
Command: show dhcpv6_relay ipif System
DHCPv6 Hops Count Limit : 4
DHCPv6 Global State : Disabled
------------------------------------------------------------------
System Interface:
DHCPv6 Relay Status : Disabled
Server Address : 2001:DB8:1234:0:218:FEFF:FEFB:1
Server Address : 3ffe::500
Server Address : 3ffe::600
Server Address : ff05::1:3%Ipif1
enable dhcpv6_relay
Purpose Used to enable the DHCPv6 relay function on the Switch.
