xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
170
DGS-3627:admin# config authentication ports all auth_mode host_based vlanid 1-3 state
enable
Command: config authentication ports all auth_mode host_based vlanid 1-3 state enable
Success.
show authentication guest_vlan
Purpose Used to show guest VLAN setting.
Syntax
show authentication guest_vlan
Description The show guest VLAN command allows you to show the information of guest VLAN.
Parameters None.
Restrictions None.
Example usage:
This example displays the guest VLAN setting:
DGS-3627:admin# show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID : 1
Guest VLAN Member Ports : 4
Guest VLAN VID : 3
Guest VLAN Member Ports : 1,8
Total Entries: 2
show authentication ports
Purpose Used to display authentication setting on port(s).
Syntax
show authentication ports {<portlist>}
Description User can use this command to display authentication method and authorization mode on
ports.
Parameters
portlist - Display compound authentication on specify port(s).
If not specify the port, displays compound authentication setting of all ports.
Restrictions None.
Example usage:
This example displays authentication setting for all ports:
