xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
236
clear dhcpv6 binding
Purpose This command is used to clear the DHCPv6 dynamic binding information.
Syntax
clear dhcpv6 binding {<pool_name 12>}
Description This command is used to clear the DHCPv6 dynamic binding information, not including
manual binding information. Users could use command (4-1-8) to delete the manual binding
information.
Parameters
<pool_name 12> - Enter the name of the DHCPv6 pool for which to clear the dynamic
binding information.
If not specify the parameter, it will delete all dynamic binding entries of the DHCPv6 server.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To clear the DHCPv6 dynamic binding information on the Switch:
DGS-3627:admin# clear dhcpv6 binding
Command: clear dhcpv6 binding
Success.
enable dhcpv6_server
Purpose This command is used to enable the DHCPv6 server function on the Switch.
Syntax
enable dhcpv6_server
Description This command is used to enable the DHCPv6 server global state on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DHCPv6 server global state to enable:
DGS-3627:admin# enable dhcpv6_server
Command: enable dhcpv6_server
Success.
disable dhcpv6_server
Purpose This command is used to disable the DHCPv6 server function on the Switch.
Syntax
disable dhcpv6_server
Description This command is used to disable the DHCPv6 server global state on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
