A SERVICE OF

logo

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
4
BASIC SWITCH COMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create account [admin | user] <username 15>
config account <username 15>
show account
delete account <username 15>
show config [current_config | config_in_NVRAM]
show session
show switch
show device status
show serial_port
config serial_port {auto_logout [never | 2_minutes | 5_minutes | 10_minutes |
15_minutes]}
enable clipaging
disable clipaging
enable telnet <tcp_port_number 1-65535>
disable telnet
enable web <tcp_port_number 1-65535>
disable web
save
reboot
reset {[config | system]}
login
logout
config
command_prompt
[<string 16> | username | default]
config
greeting_message
{default}
show
greeting_message
Each command is listed, in detail, in the following sections.
10