xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show snmp user
Purpose Used to display information about each SNMP username in the
SNMP group username table.
Syntax
show snmp user
Description
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the SNMP users currently configured on the Switch:
DES-6500:4#show snmp user
Command: show snmp user
Username Group Name VerAuthPriv
--------------- -------------------- ---------------------
initial initial V3 None None
Total Entries: 1
DES-6500:4#
create snmp view
Purpose Used to assign views to community strings to limit which MIB
objects and SNMP manager can access.
Syntax create snmp view <view_name 32> <oid> view_type [included |
excluded]
Description The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
Parameters <view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be included or excluded from access by an SNMP manager.
included − Include this object in the list of objects that an SNMP
manager can access.
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP view:
35
