xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config authen server_group
built into the Switch (TACACS/XTACACS/TACACS+/RADIUS), or by
a user-defined group previously created using the create authen
server_group command.
[add | delete] – Enter the correct parameter to add or delete a server
host from a server group.
server_host <ipaddr> - Enter the IP address of the previously
configured server host to add or delete.
protocol – Enter the protocol utilized by the server host. There are
four options:
Restrictions Only administrator-level users can issue this command.
tacacs – Use this parameter to utilize the built-in TACACS
server protocol on the Switch. Only server hosts utilizing
the TACACS protocol may be added to this group.
xtacacs – Use this parameter to utilize the built-in
XTACACS server protocol on the Switch. Only server hosts
utilizing the XTACACS protocol may be added to this group.
tacacs+ – Use this parameter to utilize the built-in
TACACS+ server protocol on the Switch. Only server hosts
utilizing the TACACS+ protocol may be added to this group.
radius - Use this parameter to utilize the built-in RADIUS
server protocol on the Switch. Only server hosts utilizing
the RADIUS protocol may be added to this group.
<string 15> - Enter an alphanumeric string of up to 15
characters to define the previously created server group.
This group may add any combination of server hosts to it,
regardless of protocol.
tacacs – Use this parameter to define the protocol if the
server host is using the TACACS authentication protocol.
xtacacs – Use this parameter to define the protocol if the
server host is using the XTACACS authentication protocol.
tacacs+ – Use this parameter to define the protocol if the
server host is using the TACACS+ authentication protocol.
radius – Use this parameter to define the protocol if the
server host is using the RADIUS authentication protocol.
Example usage:
To add an authentication host to server group “group_1”:
DES-6500:4#config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Command: config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Success.
DES-6500:4#
170
