xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#config router_ports_forbidden default add 2:1-2:10
Command: config router_ports_forbidden default add 2:1-2:10
Success.
DES-6500:4#
show router_ports
Purpose Used to display the currently configured router ports on the
Switch.
Syntax
show router_ports {vlan <vlan_name 32>} {static | dynamic |
forbidden}
Description This command will display the router ports currently configured on
the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the
router port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically
configured.
forbidden – Displays router ports that have been labeled as
forbidden.
Restrictions None.
Example usage:
To display the router ports.
Dynamic router port :
Dynamic router port :
Total Entries: 2
DES-6500:4#show router_ports
Command: show router_ports
VLAN Name : default
Static router port : 2:1-2:10
Forbidden Router Port:
VLAN Name : vlan2
Static router port :
Forbidden Router Port:
DES-6500:4#
show igmp_snooping
Purpose Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration
on the Switch.
Syntax
148
