A SERVICE OF

logo

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show safeguard_engine
Purpose To display the Safeguard Engine parameters currently set in the
Switch.
Syntax
show safeguard_engine
Description This command is used to show the Safeguard Engine information
currently set on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display current Safeguard Engine parameters:
DES-6500:4#show safeguard_engine
Command: show safeguard_engine
Safeguard engine state: Enabled
Safeguard engine current status: normal mode
----------------------------------------------------------------
CPU utilization information:
Rising threshold : 50%
Falling threshold : 30%
Trap/log state : Enabled
Mode : Strict
DES-6500:4#
237