A
Make settings for Crestron central controllers.
B
Projector Name Enter a name to differentiate the projector that is
currently connected from other projectors on the
network. (up to 16 alphanumeric characters)
Location Enter an installation location name for the projector
that is currently connected on the network. (up to
32 alphanumeric characters and symbols)
Assigned To Enter a user name for the projector. (up to 32
alphanumeric characters and symbols)
DHCP Select to use DHCP. You cannot enter an IP address
if DHCP is enabled.
IP Address Enter the IP address to assign to the currently
connected projector.
Subnet Mask Enter a subnet mask for the currently connected
projector.
Default Gateway Enter the gateway address for the currently connec‐
ted projector.
Send Click to confirm the changes made to the Projector.
C
Enabled (Admin
Password)
Select to require a password to open the Tools
window.
New Password Enter the new password when changing the pass‐
word to open the Tools window. (up to 26 alpha‐
numeric characters)
Confirm Enter the same password as you entered in New
Password. If the passwords are not the same, an
error is displayed.
Send Click to confirm the changes made to the Admin
Password.
D
Enabled (User Pass‐
word)
Select to require a password to open the operation
window on the computer.
New Password Enter the new password when changing the pass‐
word to open the operation window. (up to 26
alphanumeric characters)
Confirm Enter the same password as you entered in New
Password. If the passwords are not the same, an
error is displayed.
Send Click to confirm the changes made to the User
Password.
Related Links
• "Controlling a Networked Projector Using Crestron RoomView" p.126
Crestron RoomView Support
128
