Warning
• Let the lamp fully cool before replacing it to avoid injury.
• Never disassemble or remodel the lamp. If a modified or disassembled lamp
is installed in the projector, it could cause a fire, electric shock, or other
damage or injury.
a
Turn off the projector and unplug the power cord.
b
Allow the projector lamp to cool down for at least one hour.
c
Use the screwdriver included with the replacement lamp to loosen
the screw securing the lamp cover.
Warning
When replacing the lamp, there is a possibility that the lamp may be
broken. If replacing the lamp of a projector which has been installed on
the ceiling, you should always assume that the lamp is cracked, and you
should stand to the side of the lamp cover, not underneath it. Remove
the lamp cover gently. Be careful when removing the lamp cover as
shards of glass may fall out and could cause an injury. If any shards of
glass get into your eyes or mouth, contact your local physician
immediately.
d
Slide the lamp cover out and lift it off.
e
Loosen the screws securing the lamp to the projector. The screws
do not come all the way out.
Projector Lamp Maintenance
163
