Connecting to an External Computer Monitor
If you connected the projector to a computer using a Computer port, you
can also connect an external monitor to the projector. This lets you see
your presentation on the external monitor even when the projected image is
not visible.
If you want to output images to an external monitor when the projector is
turned off, you need to do the following:
• Select Communication On as the Standby Mode setting in the
projector's ECO menu.
• Select Always On as the A/V Output setting in the projector's
Extended menu.
s Extended > A/V Settings > A/V Output
a
Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
a
Make sure your computer is connected to the projector's
Computer port. If there are two computer ports, make sure you
use the Computer1 port.
a
Only analog RGB signals from the Computer1 port can be
output to an external monitor. You cannot output signals input
from other ports or component video signals.
b
Connect the external monitor's cable to your projector's Monitor
Out port.
Related Links
• "Connecting to External Output Devices" p.28
• "Projector Setup Settings - ECO Menu" p.150
• "Projector Setup Settings - Extended Menu" p.139
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the
projector to external self-powered speakers. You can control the volume
using the projector's remote control.
If you want to output audio from the external speakers when the projector
is turned off, you need to do the following:
• Select Communication On as the Standby Mode setting in the
projector's ECO menu.
• Select Always On as the A/V Output setting in the projector's
Extended menu.
s Extended > A/V Settings > A/V Output
a
• You can also connect the projector to an amplifier with speakers.
• The projector's built-in speaker system is disabled when you connect
external speakers.
Projector Connections
29
