![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/55/95562c32-3da1-4314-8ff4-d5eb7b49744a/95562c32-3da1-4314-8ff4-d5eb7b49744a-bg98.png)
Information item Description
Status Displays information about projector problems that
may be needed by a service technician.
Serial Number Displays the projector's serial number.
Event ID Displays the Event ID number corresponding to a
specific projector problem; see the list of Event ID
codes.
Related Links
• "Projector Information Display - Info Menu" p.151
• "Event ID Code List" p.152
Event ID Code List
If the Event ID option on the Info menu displays a code number, check
this list of Event ID codes for the solution to the projector problem
associated with the code.
If you cannot resolve the problem, contact your network administrator or
Epson for technical support.
Event ID
code
Cause and solution
0432 The network software did not start. Turn the projector off and
then on again.
0435
0434 Unstable network communication. Check the network commu‐
nication status, wait a few moments, and try connecting to the
network again.
0481
0482
0485
0433 Cannot display the transferred images. Restart the network soft‐
ware.
Event ID
code
Cause and solution
0484 Communication with computer was disconnected. Restart the
network software.
0483 The network software quit unexpectedly. Check the network
communication status, then turn the projector off and then on
again.
04FE
0479 A projector system error has occurred. Turn the projector off and
then on again.
04FF
0891 Cannot find an access point with the same SSID. Set your
computer, access point, and projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Make sure
the wireless network security settings are correct.
0893 The TKIP/AES encryption type does not match. Make sure the
wireless network security settings are correct.
0894 Communication with an unauthorized access point was discon‐
nected. Contact your network administrator.
0898 Failed to acquire DHCP. Make sure the DHCP server is operating
correctly. If you are not using DHCP, set the DHCP setting to
Off in the projector's Network menu.
s Network > Wireless LAN > IP Settings > DHCP
s Network > Wired LAN > IP Settings > DHCP
0899 Other communication errors.
Related Links
• "Info Menu - Projector Info Menu" p.151
Projector Information Display - Info Menu
152