g
Press [Menu] or [Esc] to exit the menus.
Related Links
• "Adjusting the Image Color" p.64
Adjusting the Gamma
You can correct differences in projected image colors that occur between
different image sources by adjusting the Gamma setting.
a
Turn on the projector and switch to the image source you want to
use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Advanced and press [Enter].
e
Select Gamma and press [Enter].
f
Select and adjust the correction value.
When you select a smaller value, you can reduce the overall
brightness of the image to make the image sharper. When you select
a larger value, the dark areas of images become brighter, but the
color saturation for lighter areas may become weaker.
Adjusting the Image Color
65
