iR1200 Modem
www.telusmobility.com 25
Create and Configure a Dial-up Networking Connection
1. From the computer’s desktop, double-click the My Computer icon. Then, double-click the Control Panel icon.
2. The Control Panel window opens. Double-click on the Network and Dial-up Connections icon.
3. The Network and Dial-up Connections window opens. Double-click on Make New Connection.
4. The Network Connection Wizard window opens. Click Next.
5. The Network Connection Type window opens. Select Dial-up to the Internet and click Next.
6. The Welcome to the Internet Connection Wizard opens. Select I want to set up my Internet connection manually, or
I want to connect through a Local Area Network (LAN) and click Next.
7. The Setting up your Internet connection window opens. Select I connect through a phone line and a modem and click
Next.
8. The Choose Modem window opens. From the drop-down box, select Standard 19200 bps Modem and click Next.
9. The Internet Connection, Step 1 window opens. Enter a temporary telephone number (this phone number will be
modified in Modem Properties later in the configuration). Make sure that the Use area code and dialing rules is NOT
checked. Click Advanced.
10. The Advanced Connection Properties window opens with the Connection tab selected. Verify the following settings:
Under Connection type:
• PPP (Point-to-Point Protocol) – should remain checked
• Disable LCP Extensions – should remain checked
• SLIP – should remain unchecked
• C-SLIP – should remain unchecked
Under Logon procedure:
• None – should remain checked
• Log on manually – should remain unchecked
• Use logon script – should remain unchecked
11. Click the Addresses tab and verify the following settings:
Under IP address:
• Internet service provider automatically provides one – should remain checked
• Always use the following – should remain unchecked
Under DNS server address:
• My ISP automatically provides a DNS address – should remain checked
• Always use the following – should remain unchecked
12. Click OK to continue.
13. The Internet Connection, Step 2 window opens. User name and password are not required fields. Click Next. You will
receive two warning boxes asking if you want to continue with a blank user name and a blank password. Click Yes on both
boxes.
14. The Internet Connection, Step 3 window opens. Enter a name for the connection, such as “iR1200 Modem”. Click Next.
15. The Set Up Your Internet Mail Account window opens. Select No (optional) and click Next.
16. The Completing the Internet Connection Wizard window opens. Click Finish.
Modify Dial-up Connection Parameters
1. From the computer’s desktop, double-click the My Computer icon. Then, double-click the Control Panel icon.
