iR1200 Modem
www.telusmobility.com 29
Header Compression [AT+ws182]
This command enables or disables TCP header compression options. Some DTE-side stacks (such as PPP) will negotiate
local header compression independently from this setting. To disable header compression, apply this command.
AT Command
Header Compression
Command Syntax
AT+ws182=<header compression>
AT+ws182? (?=Query parameter)
AT+ws182=? (?=Range Parameter)
Parameter Value
1 0 = over the air and local header
compression enabled.
2 1 = over the air header compression
enabled.
3 2 = Local header compression enabled
3 = header compression disabled.
Expected Return Code(s)
OK
Saving AT Settings [AT&W]
Your modem is now properly configured for use with the iDEN
network. The iR1200 modem can store up to three profile or
image. By default, image 2 is loaded when the modem is powered on. We recommend that you save this setting to the first
profile/image.
AT Command
Save User Default Configuration
Command Syntax
AT&W1
Expected Return Code(s)
OK
IMPORTANT: These settings are stored on the modem’s Random Access Memory (RAM) and are lost when
the modem is turned off unless stored in the modem’s non-volatile memory.
