A SERVICE OF

logo

Open as PDF
next previous
TELUS Mobility™
40 www.telusmobility.com
Range
ATs0=?
Parameter
Values:
0 = Do not automatically answer incoming calls
1-255 = Answer after specified number of rings
Circuit Data Establishment Timeout [ATs7]
This command allows the DTE to specify the maximum amount of time between a request for a circuit data connection and
the establishment of this connection.
Command S7
Action
ATs7=
Query
ATs7?
Range
ATs7=?
Parameter
Values:
1-255 = Seconds
30 = Default value
Comma Dial Modifier Timer [ATs8]
This command allows the DTE to set the duration of the pause associated with a comma (,) dial modifier.
Command S8
Action
ATs8=
Query
ATs8?
Range
ATs8=?
Parameter
Values:
0-255 = Seconds
2 = Default value
Circuit Data Idle Timer [ATs30]
This command specifies an idle line timeout for online data mode. If no data is sent by the DTE on the transmit data line
for the specified period of time, the DCE disconnects the call, returns the OK result code, and returns to command mode.
Command S30
Action
ATs30=
Query
ATs30?
Range
ATs30=?
Parameter
Values:
0-255 = Seconds
0 = Default value