iR1200 Modem
www.telusmobility.com 45
Extended Error AT Command
AT Command
Return Product Information
Command Syntax
AT+CEER
Expected Return Code(s)
See Extended Error Result Codes
Table
Extended Error Result Codes
Extended error result codes report the network reason why a data connection failed. If you report a failed connection to the
TELUS’ Customer Care, be sure to provide the error result code.
Code General Description
General Modem Operation
257 No further information is available
259 A command was issued during an improper state.
260 User aborted the connection.
261 DCE does not recognize an AT command.
262 Connection was aborted due to connection timeout.
263 Parameters for an AT Command are out of range.
266 The +FCLASS command failed due to incompatibilities with the current setting of the +WS46 command.
267 The +WS45 command failed due to incompatibilities with the value of the +WS46 command.
268 Invalid DTE-IP address was specified (+WPNEI).
269 Invalid Home Agent address was specified (+WV305)
270 Invalid MIP Security Parameter index was specified.
271 DCE IP address matched Home Agent IP Address (+WV304, +WV305).
272 The DTE tried to lock or unlock the DCE using an incorrect PIN.
275 An AT Command is not compatible with the current/active data service.
Packet Data Operation
519 Requested level of encryption is not allowed.
545 Service is not present.
612 A data registration error was found. Contact your service Provider.
833 FA: Mobile Node Administrative is prohibited form registration.
835 FA: Mobile Node Authentication failed.
836 FA: Home Agent Authentication failed.
897 HA: Mobile Node Administratively is prohibited from registration.
899 HA: Mobile Node Authentication failed.
900 HA: Foreign Agent Authentication failed.
1025 SLIP/PPP failed to respond.
1026 SLIP/PP failed to configure the connection.
1027 SLIP/PPP link terminated.
Circuit Data Operation
1280 No information is available.
1290 Unspecified Transmit Phase A Error.
1300 Unspecified Transmit Phase B Error.
