A SERVICE OF

logo

TELUS Mobility
32 www.telusmobility.com
Go Online [Ato]
This command causes the modem to enter the online state from the online command state.
Command O
Action
Ato
Query
Range
Pulse Dialing [Atp]
This command selects pulse dialing. It is provided for compatibility purposes.
Command P
Action
Atp
Query
Range
Quiet Mode [ATq]
This command controls whether or not the result codes are sent to the computer. If turned on, the Result Code Format and
Extended Result code commands may further modify the result codes.
Command Q
Action
ATq <setting>
Query
Range
Parameter
Values:
0 = Result codes sent
1 = Result codes not sent
Tone Dialing [ATt]
This command selects DTMF dialing. It is provided for compatibility purposes and has no processing effect.
Command T
Action
ATt
Query
Range
Verbose Result Codes [ATv]
This command sets your preference for the result code format. It allows the computer to select either Terse or Verbose result
code formats.
Command V
Action
ATv <setting>
Query
AT&v
Range
Parameter
Values:
0 = Numeric result code format
1 = Verbose result code format