Filter
Top Products
N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
10 Preparing Your Phone for Use
Removing the Battery
Switching Antennas
The R250s PRO comes with two antennas. The longer antenna gives you bet-
ter receiving signalling when you are within an area with poor radio coverage.
Please make sure that you switch antennas during dry conditions, to prevent
leakage into the phone.
Note! Do not use any antennas designed for other type of telephone. The
antenna is specially designed for the R250s PRO. With the antenna (and bat-
tery) properly attached the phone is water resistant. Using other antennas will
void the warranty.
3. Lift the battery up and away from
the phone.
1. Turn off the phone.
2. Press the battery release catch on
the top of the battery.
3. Attach the new antenna, screwing
it clockwise until it is properly
attached.
4. Insert the rubber plug into the
external antenna connector.
1. Pull out the rubber plug from the
external antenna connector.
2. Screw the antenna anti-clockwise
to remove it.