Filter
Top Products
N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
14 Turning Your Phone On and Off
Turning Your Phone
On and Off
• Press and hold the
NO
key until you hear a click.
If Enter PIN Appears in Display
Some SIM cards are protected with a PIN code. If Enter PIN appears in the
display after you have turned on the phone:
1. Enter your PIN. If you make a mistake while entering your PIN, erase the
wrong digit by pressing the
CLR
key.
2. Press # or
YES
to confirm your PIN code.
Note! If your PIN is entered incorrectly three times in a row, the SIM card is
blocked. You can unblock it by using your PUK code, which is supplied by
your operator. See “Security for Your Phone and Subscription” on page 64.
Network Search
After you have turned on the phone (and entered your PIN), the Ericsson
name appears in the display and the phone searches for a network.
When a network has been found, the phone beeps three times. The indicator
light on the top of the phone flashes green once every second and your net-
work operator’s name (in most cases abbreviated) appears in the display.
This is called standby mode. You can now make and receive calls.
Normally, the name of a network appears in the display after you have turned
your phone on, but sometimes there is no network within range that you can
use. The display then shows one of the following:
Searching
If the message Searching remains in the display, you are within range of a
network, but you are not allowed to use it. However, in an emergency, some
operators allow you to call the international emergency number 112. See
“Making and Receiving Calls” on page 19.
TURNING YOUR PHONE ON
IF NO NETWORK IS DISPLAYED
Enter
PIN
Enter
PIN
****
Searching
13:40
4
44
4 NETWORK 7
77
7
2
22
28
88
8
13:40
Searching
13:40