Filter
Top Products
Not for Commercial Use - Ericsson Inc.
Some menus/features are operator dependent.
Security 59
Automatic
If the phone lock is set to Automatic, you do not need to enter your
phone lock code until a different SIM card is inserted in the phone.
After the phone lock code has been entered correctly, the phone can
be used with the new SIM card. You are not asked to enter the phone
lock code again until the original SIM card or a different SIM card is
inserted.
Keypad Lock
This icon indicates the keypad is locked.
Note! Calls to 911 (or 112, the international number) can be made when
the keypad is locked. If the phone alarm rings, you can turn it off by
pressing any key.
The keypad remains locked until you:
• answer an incoming call.
• replace the battery.
• unlock the keypad.
Manual Keylock
Automatic Keylock
Automatic keylock means that if no keys are pressed in 25 seconds,
the keypad will be locked. The keypad lock is always disabled if the
phone is connected to vehicle handsfree equipment.
S
ETTINGS > YES > Locks > YES > Auto Keylock > YES > On > YES.
Changing the Phone Lock
Code
S
ETTINGS > YES >
Locks
> YES >
Phone Lock
> YES >
Change Code
> YES
> enter the old code > YES > enter the
new code >
YES > repeat new code >
YES.
Setting the Phone Lock S
ETTINGS > YES >
Locks
> YES >
Phone Lock
> YES >
Protection
> YES >
select
On
/
Automatic/Off
(the current
selected setting is not available in the
list) > enter the phone lock code >
YES
(the new lock status is shown).
Lock Keypad From Standby, press and hold CLR > 2
to select
Keylock On
> YES.
Unlock Keypad From Standby, press and hold
CLR >
Keylock off
> YES.