Filter
Top Products
Experiencing Multimedia 105
Storage. Select where you want to save your files. You can either save the files to the main memory or
to a storage card if one is installed.
Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are
using the camera.
Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press
the ENTER button.
Shoot Option. The camera comes with an auto-focus feature that is activated when the ENTER button is
either touched or pressed.
Touch and Press (default). Requires you to touch the ENTER button to activate the auto-focus;
when focus is set, press the ENTER button to take the shot.
Touch. Requires you to touch the ENTER button to activate autofocus; when focus is set, Camera
automatically takes the shot.
Full Press. Requires you to press the ENTER button to activate auto-focus; when focus is set, Camera
automatically takes the shot.
Image Properties. This option lets you adjust the capture properties, such as Contrast, Saturation, and
Sharpness.
1 Tap a property to adjust.
2 T
ap to reset all properties to their
default values.
3 T
ap to save the settings.
4
T
ap
/ or press Navigation
right/left (Landscape orientation) to
increase/decrease the value.
5 T
ap to close the submenu without
applying and saving the changes.
1
2
5
3 4
Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply to your photos or video
clips.
Metering Mode
. Select a metering mode to allow the camera to measure the amount of light and
calculate the best-fit exposure value before capturing. Choose either Center Area to measure light
using the center area of the subject, or Average to measure light using the area around the subject.
Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE”
or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name
files using either the current Date or Date & Time as the prefix.
Note If you set the Camera to save captured photos to a storage card, the prefix cannot be selected. Captured
photos will be named using the convention IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM
(Digital Camera Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on the storage
card.
Counter. To reset the file naming counter back to 1, tap Reset.
Flicker Adjustment
. When taking indoor shots, flicker on the camera screen may be caused by
inconsistencies between the vertical scan rate of the camera display and the flicker frequency of
fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to Auto or to the
proper frequency (50Hz or 60Hz) of the power in the country where your device is being used.
Grid (Photo mode). Choose whether or not to
show a grid on the Camera screen. Showing a
grid helps you frame and center your subject
easily and accurately.
•
Grid marks
.
•
•
•
•
•
•
•
•
•
•
•
•
•