Filter
Top Products
Chapter 3 — Configuring the Computer
751G Color Mobile Computer User’s Manual 87
Set Information Functions
AddWep()
Call this function to add a WEP key to the radio. Call this function
multiple times when adding more than one WEP key. Save the “default”
key for last. For example, when adding four keys, and the second key is the
default transmit key, add keys 1, 3 and 4 before you add key 2. Note: Add
the default transmit key last.
EnableWep()
Enables or disables WEP encryption on the radio (TRUE/FALSE).
Syntax UINT AddWep( ULONG, BOOL, TCHAR * );
Parameters ULONG Specifies the key index to be set. Valid values are 0–3.
BOOL When set to TRUE, specifies that this key is the default transmit key.
TCHAR Pointer to a character array that specifies the key data in either HEX (length of 10 or 26) or
ASCII (length of 5 or 13). This string must be null-terminated.
Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks When adding WEP keys to the radio, turn off encryption before you add the keys, then turn encryption
back on afterwards. Also, be sure to add the TRANSMIT KEY last.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_AddWep)(ULONG, BOOL, TCHAR *);
#else
UINT AddWep(ULONG, BOOL, TCHAR *);
#endif
Syntax UINT EnableWep( BOOL );
Parameters Set BOOL to TRUE to enable WEP encryption, or FALSE to disable WEP encryption.
Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks Call this function with TRUE as the parameter to enable WEP encryption. Call this function with the
FALSE parameter to disable WEP encryption. This is an alias for EncryptionStatus(). See the following:
EnableWEP(TRUE) = EncryptionStatus(NDIS_ENCRYPTION_1_ENABLED)
EnableWEP(FALSE) = EncryptionStatus(NDIS_ENCRYPTION_DISABLED)
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_EnableWep)(BOOL);
#else
UINT EnableWep(BOOL);
#endif