Filter
Top Products
Chapter 3 — Configuring the Computer
751G Color Mobile Computer User’s Manual 45
5 Add the AuotRun.exe file to the “\SDMMC Disk\2577” folder.
6 Remove the Secure Digital storage card from your PC and reinstall it
into the 751G, then warm-boot the 751G to add these files to the Secure
Digital storage card.
If the AutoUser.dat file is found and the “RUN=” statement is correct, the
task manager launches and executes your program on startup.
Using the SmartSystems Console
1 Download the file from the Intermec web site, unzip it on your desktop.
2 From the SmartSystems Console, drag-and-drop the application onto
each 751G discovered in your network.
To download SmartSystems Foundation, go to www.intermec.com/idl and
open the Device Management page. For information on using the
SmartSystems Console, see its online help.
Using Wavelink Avalanche
You can use the Wavelink Avalanche device management system to install
applications on all of your wireless 751Gs.
The wireless 751G ships with the Avalanche Enabler already loaded on it.
The Avalanche Enabler is configured to activate automatically (typically on
a clean-boot).
When the Avalanche Enabler is activated, the 751G attempts to connect to
the Avalanche Agent. When the 751G connects to the Agent, the Agent
determines whether an update is available and immediately starts the
software upgrade, file transfer, or configuration update.
1 Use the Avalanche Management Console to install software packages
and updates. For help, see its online help, contact an Intermec
representative, or visit the Wavelink web site at www.wavelink.com.
2 Schedule the 751G updates or manually initiate an update using the
Avalanche Management Console.
You can use the SmartSystems Console to drag-and-drop Intermec
applications onto your 751Gs. The 751G ships with the SmartSystems
client loaded on it. The console is part of SmartSystems Foundation and is
available from the Intermec web site.
Note: If you manually activate the Avalanche Enabler on the 751G, you
may be prompted for a password when you exit the Avalanche Enabler. The
default password is leave.