Filter
Top Products
Chapter 4 — Maintaining the Computer
751G Color Mobile Computer User’s Manual 105
button, or you may damage the Reset button.
This shows the back of the 751G inside the battery compartment.
5 Return the 751G to DC power, such as installing it into a dock
connected to external power.
6 When the Bootloader Menu shows “complete,“ remove the storage card,
then press the Reset button again to load the new operating system.
7 When the 751G finishes booting, insert the battery, then close the
battery door.
You may use the 751G. You have reset the 751G to its default
configuration. You need to set the date and time and to set its network
communications parameters to reestablish communications with the other
devices in the wireless network.
Using the SmartSystems Console to Upgrade the Computer
You can use the SmartSystems Console to upgrade the operating system on
your 751G. The console is part of SmartSystems Foundation and is
available from the Intermec web site via the Intermec Developer Library
(IDL). Before you can upgrade your computer, you need:
• the SmartSystems Foundation. To download SmartSystems Foundation,
go to www.intermec.com/idl and open the Device Management page.
• the device upgrade .exe file. This file is available from the Intermec web
site at www.intermec.com. Go to Service & Support > Downloads.
Make sure the file you select is for your language.
1 Install SmartSystems Foundation on your PC and open the
SmartSystems Console.
2 Ensure the SmartSystems Console and 751Gs are on the same subnet.
3 Make sure your 751Gs are either in a communications dock or charging
dock, such as the AD14, or that power management is disabled.
4 Download the device upgrade .exe file to your desktop PC.
Note: The upgrade will fail if the 751G is not connected to external power.
For help, see “Accessories” on page 18.
Reset button