Filter
Top Products
Connectivity52
communicate with other Bluetooth
devices over a maximum of
approximately 10 metres (30 feet).
You must activate the Bluetooth function
to establish a Bluetooth connection
between your phone and other Bluetooth
devices.
Turning Bluetooth function on
• Select in CommManager to
activate Bluetooth function and turn
on visibility.
• Press (Menu) in Start > Settings
> Connections > Bluetooth and select
Turn On Bluetooth.
is displayed when Bluetooth function
is turned on.
Turning Bluetooth function off
• Select in CommManager to
deactivate Bluetooth function.
• Press (Menu) in Bluetooth and
select Turn off Bluetooth.
Making the phone visible
To make the phone discoverable and
enable it to be found by other Bluetooth
devices, you need to set the visibility of
your phone.
Select (Menu) and then Turn On
Visibility.
Creating a Bluetooth connection
1. Turn on Bluetooth function and set
the phone to be visible as instructed
in "Turning Bluetooth function on"
on page 52.
2. Select Add new device....
3. The phone then begins searching for
other Bluetooth devices.
Search again by pressing
(Menu) and select Refresh.
4. A list of available devices is displayed.
Select a device and confirm with
.
5. When asked for permission to
connect to the device, enter the
passcode for the device, both in the
phone and in the device that you are
connecting to.
6. When the passcode is accepted, the
device is paired. The bluetooth
connection is established
automatically. The name of the
paired device is displayed, or you can
rename it in Menu > Edit.
The Bluetooth® word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Kyocera Wireless
Corp. is under license. Other trademarks
and trade names are those of their
respective owners.
When your phone is set to be invisible,
your phone can still pair with other
Bluetooth devices but can’t be found by
them.